PESA VIDBLOX 3G-NE RX, Руководство пользователя

Страница: 42 / 57

V
IDBLOX
3G-SL
AND
3G-NE RX M
ODULE
Publication 81-9059-0667-0, Rev. C
March 2011
Proprietary Information of PESA 4-23
Figure 4-13 Device Properties Window
If you wish to manually enter an IP address for the module, click the DHCP Off radio button and
the Static IP Information fields become active and displayed with bold characters, as shown in
Figure 4-12. Make any changes needed to indicated network parameters. You MUST press the
Enter key after entering each line of data in order for the entries to be active. Click the Apply
button and a pop-up message is displayed asking you to verify the IP address change. When the
address change is complete, and Vidblox is operating in the DHCP Off mode, the new network
parameters are displayed by active fields in the Devices Properties window as shown by the right-
hand illustration in Figure 4-13.
When Vidblox is operating with an assigned static IP address in DHCP Off mode, you may select
DHCP On by clicking the On radio button. All fields of the Static IP Information window
immediately display as inactive. Click the Apply button and a pop-up message is displayed asking
you to verify the IP address change. When the address change is complete, the new network
parameters are displayed in the Devices Properties window.
With Vidblox operating in DHCP Off mode, you may modify the static IP address or other network
parameters currently in use through either the Static IP Information fields of the Configurations
screen, or through fields of the Device Properties window. If you choose to make changes through
the Device Properties window, click the Apply button in the window to initiate address change.
If a Vidblox module operating in the DHCP Off mode should ever
encounter a network conflict with an IP address, you could lose
communication with that module. If that happens, the Configurations
menu screen is not accessible. You can enter a non-conflicting IP
address through the fields of the Device Properties window. Click the
Apply button in the window to initiate the IP address change.