PerkinElmer SPECTRUM TWO N, Руководство пользователя

Страница: 65 / 125

Getting Started with Spectrum Software . 65
NOTE: The Search tutorial provides an example of using the Search process to identify an
unknown contaminant in a sample.
Quantification
Peak Area/Height
Use the Peak Area/Height process to produce a table of the peak areas and/or peak heights
for your spectrum or spectra. You can process spectra individually, or select a spectrum on
which to define the parameters that will be used for a number of spectra.
The height can be defined at a point ( Height ), or as the maximum height between two
points ( Max Height ). The Bases section enables you to define the baseline that is used
when determining the peak area or height.
Figure 49 Peak Area/Height dialog
When the Peak Area/Height process is run, the results are shown on the Peak Table tab
(Figure 39).
Quant
The Quant process is used to quantify properties of a sample by using one or more Quant
methods created using the Spectrum Quant Builders. The Spectrum Quant Builder software
enables you to build a method using a set of standard spectra that you have collected. Once
the method has been built and then validated in the Quant Builder software, it can be used
to quantify a component in your sample spectrum.