PerkinElmer RamanFlex 400 Скачать руководство пользователя страница 88

Страница: 88 / 94

88 . RamanFlex 400 Series Getting Started Guide

Servicing the Spectrometer

We recommend that you do not remove the protective housing or external panels of the

spectrometer module except to clean the air filters (See

Cleaning the Air Filters

on page 87).

There are no other user-serviceable parts in the instrument. If you require an instrument

service please contact PerkinElmer. Only PerkinElmer Service Engineers should attempt to

service the spectrometer.

WARNING

Removal of the protective housing or exterior panels on any instrument

will allow potentially hazardous Class 3B laser radiation to be emitted

and will invalidate the instrument warranty.

Maintenance and Service of the Fiber Optic Probe

The FOP is designed to be maintenance free and should not be opened or adjusted by

anyone other than a PerkinElmer Service Engineer. Contact PerkinElmer if you have any

questions regarding maintenance or servicing of the FOP.

The immersion sleeve (if purchased) is manufactured with 316 stainless steel or Hastelloy C

and contains either a quartz or sapphire optical window that is sealed. The quartz window

can be removed for cleaning by unscrewing the end of the immersion tube. The sapphire

window cannot be removed as it is welded into place. If removing the quartz window, do not

lose the PTFE O-rings, as these are required to maintain the immersion seal. Without these

PTFE rings the immersion tube will leak and the FOP will be damaged.

The front lens or window on the fiber probe body and the immersion sleeve window should

be left free from debris. To clean simply wipe the fiber faces clean with alcohol soaked cotton

swabs or lint-free tissues.

Damage to the FOP as a result of accident, neglect, misuse, or as a result of service or

modification by anyone other than PerkinElmer will invalidate the FOP warranty.

NOTE: For details of how to maintain and clean a triggered fiber optic probe, see the

Raman

Triggered Fiber Optic Probe

leaflet (L1321887).

Содержание RamanFlex 400































































































Результаты поиска

Содержание RamanFlex 400

Отзывы:

Бренды по названию

Популярные бренды

PerkinElmer RamanFlex 400, Руководство по началу работы

Результаты поиска

Содержание RamanFlex 400

Отзывы:

Бренды по названию

Популярные бренды