2
3. Encryption Type:
Select the encryption code type for your wireless network. Several options
are listed below:
i. None (no code)
ii. WEP (10 Hex Digital) Input 10 digits as WEP encode key.
iii. WEP (26 Hex Digital) Input 26 digits as WEP encode key.
iv. WEP (5 Chars) Input 5 English letters as WEP encode key.
v. WEP (13 Chars) Input 13 English letters as WEP encode key.
vi. WPA/TKIP (8 - 63 Chars) Input 8 to 63 English letters as WPA/TKIP encode key.
vii. WPA/AES (8 - 63 Chars) Input 8 to 63 English letters as WPA/AES encode key.
4. KEY:
Input WEP or WPA encode key for encryption encoding described above. Please input
suitable length of digital key according to encryption type.
5. IP setup:
Input IP address value and mode. If PPPoE dial-up connection mdoe is used and
password is assigned by PPPoE router, please select "Get Address by PPPoE". If your system
IP is auto assigned by DHCP, please select "Get Address by DHCP" and no IP setting needed.
If you want to manually setup the IP address, please select "Specify an Address" and input IP
address/Subnet Mask Address/Gateway IP Address/Domain Name Server values. Example is
shown below.
5.4 NETWORK STATUS
Figure 21.
IP Camera setup - Network Status Display
