66
Declaration of Incorporation
In accordance with the EC-Machinery Directive 2006/42/EG,
Annex II 1. B for partly completed machinery
Manufacturer
PERI GmbH
Rudolf-Diesel-Strasse 19
89264 Weissenhorn
Person established within the Community
authorized to compile the relevant technical
documentation.
PERI GmbH
Rudolf-Diesel-Strasse 19
DE - 89264 Weissenhorn
1.1.3, 1.3., 1.6.1, 1.3.7, 1.3.1, 1.3.2, 1.3.9, 1.5.1, 1.5.15, 1.6.3, 1.6.5
It is declared, that the following essential requirements of the Machinery Directive 2006/42/EG are
fulfilled:
Climbing Mechanism
RCS
Climbing Technology
MO-18-12493#0#
PRJ-2018-11-16-0001
Climbing Mechanism
RCS
The Climbing Device RCS 50 is positioned on the Climbing Shoe RCS. The Climbing Shoe RCS is
anchored to the building by means of a wall or slab shoe.
The climbing device works together with the climbing pawl in the climbing shoe.
The claw on the piston engages the climbing bolts (spacers in the Climbing Rail RCS) an pushes both of
them, together with the supporting structure, upwards.
At the end of the stroke, the pawl in the climbing shoe engages in another climbing bolt.
Once the cylinder is retracted, the pawl carries the load and the claw circumvents the next climbing bolt.
After this the claw engages this climbing bolt.
Produ
c
t
Typ
e
Ma
chine number
Proje
c
t
num
b
er
Trade Name
Fun
c
tion
Description and identification of the partly completed machinery
It is also declared, that the specific technical documentation
has been drawn up in accordance with Annex
VII
,
Part
B.
It is expressly declared, that the partly completed machinery complies with all relevant provisions of the
following EC Directive or Directives.
Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the
harmonization of the laws of the Member States relating to the availability of pressure equipment on
the market
Published in L 189/164 of 27.06.2014.
Reference to the harmonized standards used, as referred to in Article 7 (2)
EN ISO 12100:2010-11
EN 60204-1:2006-06
EN 614-1:2006+A1:2009
EN ISO 13857:2008
EN 349:1993+A1:2008
Safety of machines – General design principles – Risk assessment and mitigation
(ISO 12100:2010)
Safety of machines – Electrical equipment of machines – Part 1: general requirements
Safety of machines – Ergonomic design principles – Part 1: terminology and general principles
Safety of machines – Safety distances to prevent hazardous areas being reached by the upper and
lower limbs (ISO 13857:2008)
Safety of machines – Minimum gaps to avoid crushing of parts of the human body
Fluid technology - General rules and safety requirements for hydraulic systems and their components
und deren Bauteile (ISO 4413:2010)
EN ISO 4413:2010
The manufacturer or his authorized representative shall be obliged to communicate to the national authorities, on a reasoned request, the
specific documentation concerning the partly completed machinery. This information shall be supplied in digital form or, on request, in paper
form.
The industrial property rights remain unaffected by this!
Page
1/2
Page 1/2
2014/68/EU
RCS Climbing Device and Hydraulics
Assembly Instructions
Part F Appendix
This document is a translation into
English from the German original.