PERCo TTR-07.1, Руководство по сборке и эксплуатации

Страница: 17 / 34

Assembly and Operation Manual
6 MARKING AND PACKAGING
The turnstile has the marking on the turnstile housing in the form of a label located on the
inner panel of the turnstile housing (to get access to the label unscrew the fixing bolt of the
cover (2), located beneath the hub (3) and carefully lift up the cover with the LED
indication display (2) by turning it in direction of the display).
The complete delivery set of the turnstile (Chapter 4) is packed in a transportation box,
which keeps it undamaged during the transportation and storage.
Transportation box dimensions (L × W × H)
, cm..................................................114×32×32
Transportation box weight (gross) ........................................................ no more than 43 kg
7 SAFETY REQUIREMENTS
7.1 Installation safety requirements
The installation should be carried out only by the qualified personnel after careful study of
this
Manual .
Warning!

All the cables should be connected up when the power supply is switched off
from the AC mains.

Only serviceable tools should be used for installation.

Observe general electrical safety rules when laying out the cables.

Before the turnstile first power on make sure its installation and connection have
been made accordingly.
7.2 Operation safety requirements
Observe general electrical Operation safety rules when operating the turnstile.
Do not use!

Do not use the turnstile under conditions that do not comply with the
requirements of Chapter 2 of this Manual.

Do not use the turnstile at supply voltage that does not comply with the
requirements of Chapter 3 of the Manual.
Safety requirements on the power supply units operation are shown in their certificates.
16