Pepwave MAX and Surf User Manual
http://www.pepwave.com
58
Copyright @ 2016 Pepwave
health check DNS servers, regardless of whether the result is positive or negative.
Timeout
If a health check test cannot be completed within the specified amount of time, the test will
be treated as failed.
Health Check
Interval
This is the number of consecutive check failures before treating a connection as down.
Health Check
Retries
This is the number of consecutive check failures before treating a connection as down.
Recovery
Retries
This is the number of responses required after a health check failure before treating a
connection as up again.
WAN Port (Section 3)
Dynamic DNS
Service
Provider
This setting specifies the dynamic DNS service provider to be used for the WAN based on
supported dynamic DNS service providers:
•
changeip.com
•
dyndns.org
•
no-ip.org
•
tzo.com
•
DNS-O-Matic
Select
Disabled
to disable this feature. See
Section 9.5
for configuration details.
Bandwidth
Allowance
Monitor
This option enables bandwidth usage monitoring on this WAN connection for each billing
cycle. When this setting is not enabled, each month’s bandwidth usage is tracked, but no
action will be taken.
Port Speed
This setting specifies port speed and duplex configurations of the WAN port. By default,
Auto
is selected and the appropriate data speed is automatically detected by the Pepwave
router. In the event of negotiation issues, the port speed can be manually specified. You can
also choose whether or not to advertise the speed to the peer by selecting the
Advertise
Speed
checkbox.
MTU
This setting specifies the maximum transmission unit. By default, MTU is set to
Custom
1440
. You may adjust the MTU value by editing the text field. Click
Default
to restore the
