Pepwave MAX and Surf User Manual
http://www.pepwave.com
121
Copyright @ 2016 Pepwave
Event Logging
This setting specifies whether or not to log matched firewall events. The logged messages
are shown on the page
Status>Event Log
. A sample message is as follows:
Aug 13 23:47:44 Denied CONN=Ethernet WAN SRC=20.3.2.1
DST=192.168.1.20 LEN=48 PROTO=TCP SPT=2260 DPT=80
•
CONN:
The connection where the log entry refers to
•
SRC:
Source IP address
•
DST:
Destination IP address
•
LEN:
Packet length
•
PROTO:
Protocol
•
SPT:
Source port
•
DPT:
Destination port
Click
Save
to store your changes. To create an additional firewall rule, click
Add Rule
and repeat the above steps.
To change a rule’s priority, simply drag and drop the rule:
•
Hold the left mouse button on the rule.
•
Move it to the desired position.
•
Drop it by releasing the mouse button.
Tip
If the default inbound rule is set to
Allow
for NAT-enabled WANs, no inbound Allow firewall rules will be required
for inbound port forwarding and inbound NAT mapping rules. However, if the default inbound rule is set as
Deny
,
a corresponding Allow firewall rule will be required.
