Pepwave MAX and Surf User Manual
http://www.pepwave.com
138
Copyright @ 2016 Pepwave
Current SSID information appears in the
SSID
section. To edit an existing SSID, click its
name in the list. To add a new SSID, click
Add
. Note that the following settings vary by
model.
SSID Settings
SSID
This setting specifies the SSID of the virtual AP to be scanned by Wi-Fi clients.
Enable
Select
Yes
to enable the virtual AP.
VLAN ID
This setting specifies the VLAN ID to be tagged on all outgoing packets generated
from this wireless network (i.e., packets that travel from the Wi-Fi segment through
the Pepwave AP One unit to the Ethernet segment via the LAN port). The default
value of this setting is
0
, which means VLAN tagging is disabled (instead of tagged
with zero).
Broadcast SSID
This setting specifies whether or not Wi-Fi clients can scan the SSID of this wireless
network.
Broadcast SSID
is enabled by default.
Data Rate
A
Select
Auto
to allow the Pepwave router to set the data rate automatically, or select
Fixed
and choose a rate from the displayed drop-down menu.
Multicast Filter
A
This setting enables the filtering of multicast network traffic to the wireless SSID.
