Pepwave MAX and Surf User Manual
http://www.pepwave.com
139
Copyright @ 2016 Pepwave
Multicast Rate
A
This setting specifies the transmit rate to be used for sending multicast network
traffic. The selected
Protocol
and
Channel Bonding
settings will affect the rate
options and values available here.
IGMP Snooping
A
To allow the Pepwave router to listen to internet group management protocol (IGMP)
network traffic, select this option.
DHCP Option 82
A
If you use a distributed DHCP server/relay environment, you can enable this option to
provide additional information on the manner in which clients are physically
connected to the network.
Network Priority
(QoS)
A
Select from
Gold
,
Silver
, and
Bronze
to control the QoS priority of this wireless
network’s traffic.
Layer 2 Isolation
A
Layer 2
refers to the second layer in the ISO Open System Interconnect model.
When this option is enabled, clients on the same VLAN, SSID, or subnet are isolated
to that VLAN, SSID, or subnet, which can enhance security. Traffic is passed to
upper communication layer(s). By default, the setting is disabled.
Band Steering
A
Band steering allows the Pepwave router to steer AP clients from the 2.4GHz band to
the 5GHz band for better usage of bandwidth. To make steering mandatory, select
Enforce
. To cause the Pepwave router to preferentially choose steering, select
Prefer
. The default for this setting is
Disable
.
A
- Advanced feature. Click the
button on the top right-hand corner to activate.
Security Settings
Security
Policy
This setting configures the wireless authentication and encryption methods. Available
options are
Open (No Encryption)
,
WPA/WPA2 - Personal
,
WPA/WPA2 – Enterprise
and
Static WEP
.
Access Control
Restricted
Mode
The settings allow administrator to control access using MAC address filtering. Available
options are
None
,
Deny all except listed
,
Accept all except listed
, and
RADIUS MAC
Authentication
.
When
WPA/WPA2 - Enterprise
is configured, RADIUS-based 802.1 x authentication is
enabled. Under this configuration, the
Shared Key
option should be disabled. When using
