Pepwave HD2 mini, Руководство пользователя

Страница: 154 / 188

Pepwave MAX and Surf User Manual
http://www.pepwave.com 154 Copyright @ 2016 Pepwave
Email Notification Settings
Email
Notification
This setting specifies whether or not to enable email notification. If Enable is checked, the
Pepwave router will send email messages to system administrators when the WAN status
changes or when new firmware is available. If
Enable is not checked, email notification is
disabled and the Pepwave router will not send email messages.
SMTP Server
This setting specifies the SMTP server to be used for sending email. If the server requires
authentication, check
Require authentication .
SSL Encryption
Check the box to enable SMTPS. When the box is checked, SMTP Port will be changed to
465 automatically.
SMTP Port
This field is for specifying the SMTP port number. By default, this is set to 25 ; when SSL
Encryption is checked, the default port number will be set to 465 . You may customize the
port number by editing this field. Click Default to restore the number to its default setting.
SMTP User
Name /
Password
This setting specifies the SMTP username and password while sending email. These
options are shown only if
Require authentication is checked in the SMTP Server setting.
Confirm SMTP
Password
This field allows you to verify and confirm the new administrator password.
Sender’s Email
Address
This setting specifies the email address the Pepwave router will use to send reports.
Recipient’s
Email Address
This setting specifies the email address(es) to which the Pepwave router will send email
notifications. For multiple recipients, separate each email addresses using the enter key.
After you have finished setting up email notifications, you can click the Test Email
Notification button to test the settings before saving. After Test Email Notification is