Pepwave MAX and Surf User Manual
http://www.pepwave.com
81
Copyright @ 2016 Pepwave
Advanced Wi-Fi AP settings can be displayed by clicking the
on the top right-hand
corner of the
Wi-Fi AP Settings
section, which can be found at
AP>Settings
. Other
models will display a separate section called
Wi-Fi AP Advanced Settings
, which can
be found at
Advanced>Wi-Fi Settings
.
Wi-Fi AP Advanced Settings
Beacon Rate
A
This option is for setting the transmit bit rate for sending a beacon. By default,
1Mbps
is
selected.
Beacon Interval
A
This option is for setting the time interval between each beacon. By default,
100ms
is
selected.
DTIM
A
This field allows you to set the frequency for the beacon to include delivery traffic
indication messages. The interval is measured in milliseconds. The default value is set to
1 ms
.
Slot Time
A
This field is for specifying the unit wait time before transmitting a packet. By default, this
field is set to
9 µs
.
ACK Timeout
A
This field is for setting the wait time to receive an acknowledgement packet before
performing a retransmission. By default, this field is set to
48 µs
.
Frame
Aggregation
A
This option allows you to enable frame aggregation to increase transmission throughput.
Guard Interval
A
This is where you opt for a short or long guard period interval for your transmissions.
A
- Advanced feature, please click the
button on the top right-hand corner to activate.