Pepwave BR1 ENT, Руководство пользователя

Страница: 94 / 206

PepVPN Profile Settings
Name
This field is for specifying a name to represent this profile. The name can be any
combination of alphanumeric characters (0-9, A-Z, a-z), underscores (_), dashes (-), and/or
non-leading/trailing spaces ( ).
Active
When this box is checked, this VPN connection profile will be enabled. Otherwise, it will be
disabled.
Encryption
By default, VPN traffic is encrypted with
​
256-bit AES
​
. If
​
Off
​
is selected on both sides of a
VPN connection, no encryption will be applied.
Authentication
Select from
​
By Remote ID Only
​
,
​
Preshared Key
​
, or
​
X.509
​
to specify the method the
Peplink Balance will use to authenticate peers. When selecting ​ By Remote ID Only ​ , be
sure to enter a unique peer ID number in the ​ Remote ID ​ field.
Remote ID /
Pre-shared Key
This optional field becomes available when ​ Remote ID / ​ ​ Pre-shared Key ​ is selected as the
Peplink Balance’s VPN ​ Authentication ​ method, as explained above. ​ Pre-shared Key
defines the pre-shared key used for this particular VPN connection. The VPN connection's
session key will be further protected by the pre-shared key. The connection will be up only if
the pre-shared keys on each side match. When the peer is running firmware 5.0+, this
setting will be ignored.
Enter Remote IDs either by typing out each Remote ID and Pre-shared Key, or by pasting a
http://www.peplink.com 94 Copyright @ 2017 Pepwave