manualshive.com logo in svg

Pepwave BR1 ENT, Руководство пользователя, Страница: 165 / 206

Поделиться
Скачать
Pepwave BR1 ENT Скачать руководство пользователя страница 165

 

read-only user feature will be enabled.

 

Confirm User 

Password

 

This field allows you to verify and confirm the new user password.

 

Web Session 

Timeout

 

This field specifies the number of hours and minutes that a web session can remain idle 
before the Pepwave router terminates its access to the web admin interface. By default, it 
is set to 

​

4 hours

​

.

 

Authentication 

by RADIUS

 

With this box is checked, the web admin will authenticate using an external RADIUS 
server. Authenticated users are treated as either "admin" with full read-write permission 
or “user” with read-only access. Local admin and user accounts will be disabled. When 
the device is not able to communicate with the external RADIUS server, local accounts 
will be enabled again for emergency access. Additional authentication options will be 
available once this box is checked.

 

Auth Protocol

 

This specifies the authentication protocol used. Available options are 

​

MS-CHAP v2

​

 and 

PAP

​

.

 

Auth Server

 

This specifies the access address and port of the external RADIUS server.

 

Auth Server 

Secret

 

This field is for entering the secret key for accessing the RADIUS server.

 

Auth Timeout

 

This option specifies the time value for authentication timeout.

 

Accounting 

Server

 

This specifies the access address and port of the external accounting server.

 

Accounting 

Server Secret

 

This field is for entering the secret key for accessing the accounting server.

 

Network 

Connection

 

This option is for specifying the network connection to be used for authentication. Users 
can choose from LAN, WAN, and VPN connections.

 

CLI SSH 

 

The CLI (command line interface) can be accessed via SSH. This field enables CLI 
support. For additional information regarding CLI, please refer to 

​

Section 

​

21.16

​

.

 

CLI SSH Port

 

This field determines the port on which clients can access CLI SSH.

 

CLI SSH 

Access

 

This menu allows you to choose between granting access to LAN and WAN clients, or to 
LAN clients only. 

 

Security

 

This option is for specifying the protocol(s) through which the web admin interface can be 
accessed:

 

●

HTTP

 

●

HTTPS 

 

●

HTTP/HTTPS

 

 

http://www.peplink.com 

165 

  Copyright @ 2017 Pepwave 

 

Содержание BR1 ENT















































































































































































































Отзывы:

Нет отзывов