Pepwave BR1 ENT, Руководство пользователя, Страница: 70 / 206

General Settings
Independent
from Backup
WANs
If this is checked, the connection will be working independent from other Backup WAN
connections. Those in Backup Priority will ignore the status of this WAN connection, and will be
used when none of the other higher priority connections are available.
Standby State
This option allows you to choose whether to remain connected or disconnected when this WAN
connection is no longer in the highest priority and has entered the standby state. When
​ Remain
connected
​
is chosen, bringing up this WAN connection to active makes it immediately available
for use.
Idle
Disconnect
When Internet traffic is not detected within the user-specified timeframe, the modem will
automatically disconnect. Once the traffic is resumed by the LAN host, the connection will be
re-activated.
Health Check Settings
Health Check
Method
This setting allows you to specify the health check method for the cellular connection. Available
options are
​ Disabled, Ping, DNS Lookup, HTTP, ​ and ​ SmartCheck ​ . The default method is
DNS Lookup
​
. See
​
Section
​
10.4
​
for configuration details.
Timeout
If a health check test cannot be completed within the specified amount of time, the test will be
treated as failed.
Health Check
Interval
This is the time interval between each health check test.
Health Check
Retries
This is the number of consecutive check failures before treating a connection as down.
Recovery
Retries
This is the number of responses required after a health check failure before treating a
connection as up again.
http://www.peplink.com 70 Copyright @ 2017 Pepwave