manualshive.com logo in svg

Pepwave BR1 ENT, Руководство пользователя, Страница: 10 / 206

Поделиться
Скачать
Pepwave BR1 ENT Скачать руководство пользователя страница 10

 

UDP

 

User Datagram Protocol

 

VPN

 

Virtual Private Network

 

VRRP

 

Virtual Router Redundancy Protocol

 

WAN

 

Wide Area Network

 

WINS

 

Windows Internet Name Service

 

WLAN

 

Wireless Local Area Network

 

 
 

3

Product Features

 

Pepwave routers enable all LAN users to share broadband Internet connections, and they 
provide advanced features to enhance Internet access. Our Max BR wireless routers support 
multiple SIM cards. They can be configured to switch from using one SIM card to another SIM 
card according to different criteria, including wireless network reliability and data usage. 

 

Our MAX HD series wireless routers are embedded with multiple 4G LTE modems, and allow 
simultaneous wireless Internet connections through multiple wireless networks. The wireless 
Internet connections can be bonded together using our SpeedFusion technology. This allows 
better reliability, larger bandwidth, and increased wireless coverage are comparing to use only 
one 4G LTE modem.

 

Below is a list of supported features on Pepwave routers. Features vary by model. For more 
information, please see peplink.com/products.

 

3.1

Supported Network Features

 

3.1.1 WAN

 

●

Ethernet WAN connection in full/half duplex

 

●

Static IP support for PPPoE

 

●

Built-in cellular modems

 

●

USB mobile connection(s) 

 

●

Wi-Fi WAN connection

 

●

Network address translation (NAT)/port address translation (PAT)

 

 

http://www.peplink.com 

10 

  Copyright @ 2017 Pepwave 

 

Содержание BR1 ENT















































































































































































































Отзывы:

Нет отзывов