manualshive.com logo in svg

Pepwave BR1 ENT, Руководство пользователя, Страница: 66 / 206

Поделиться
Скачать
Pepwave BR1 ENT Скачать руководство пользователя страница 66

 

IMSI

 

This is the International Mobile Subscriber Identity which uniquely identifies the SIM card. This 
is applicable to 3G modems only.

 

MEID

 

Some Pepwave routers support both HSPA and EV-DO. For Sprint or Verizon Wireless EV-DO 
users, a unique MEID identifier code (in hexadecimal format) is used by the carrier to associate 
the EV-DO device with the user. This information is presented in hex and decimal format.

 

ESN

 

This serves the same purpose as MEID HEX but uses an older format.

 

IMEI

 

This is the unique ID for identifying the modem in GSM/HSPA mode.

 

 

 

 

WAN Connection Settings

 

WAN 

Connection 

Name

 

Enter a name to represent this WAN connection.

 

Operating 

Schedule

 

Click the drop-down menu to apply a time schedule to this interface if needed.

 

Subnet 

Selection

 

Auto: The subnet mask will be set automatically.

 

 

Force /31 Subnet: The subnet mask will be set as 255.255.255.254(/31), and the gateway IP 
address will be recalculated.

 

Routing Mode

 

This option allows you to select the routing method to be used in routing IP frames via the 
WAN connection. The mode can be either 

​

NAT 

​

(network address translation) or 

​

IP 

Forwarding

​

. Click the 

 button to enable IP forwarding.

 

DNS Servers

 

Each ISP may provide a set of DNS servers for DNS lookups. This setting specifies the

 

DNS (Domain Name System) servers to be used when a DNS lookup is routed through this

 

 

http://www.peplink.com 

66 

  Copyright @ 2017 Pepwave 

 

Содержание BR1 ENT















































































































































































































Отзывы:

Нет отзывов