Pepwave BR1 ENT Скачать руководство пользователя страница 58

Страница: 58 / 206

10.1 Ethernet WAN

Health Check Settings

Health Check

Method

This field specifies the Health Check method to be used for this WAN connection.

●

Disabled - The WAN connection is always considered to be up and will not be
treated as down for any IP routing errors.

●

PING - ICMP PING packets will be issued to test connectivity with configurable
target IP addresses or host names.

●

DNS Lookup - DNS lookups will be issued to test the connectivity with configurable
target DNS server IP addresses.

●

HTTP - HTTP connections will be issued to test the connectivity with configurable
URLs and strings to match.

Default: DNS Lookup

PING Hosts

These fields are for specifying the target IP addresses or host names where ICMP Ping
packets will be sent to for health check.

If the box Use first two DNS servers as PING Hosts is checked, the first two DNS servers
will be the ping targets for checking the connection healthiness. If the box is not checked,
the field Host 1 must be filled and the field Host 2 is optional.

The connection is considered to be up if ping responses are received from any one of the
ping hosts.

Timeout

If a health check test cannot be completed within the specified amount of time, the test will
be treated as failed.

Health Check

Interval

This is the time interval between each health check test.

http://www.peplink.com

Содержание BR1 ENT






































































































































































































Результаты поиска

Содержание BR1 ENT

Отзывы:

Похожие инструкции для BR1 ENT

Бренды по названию

Популярные бренды

Pepwave BR1 ENT, Руководство пользователя

Результаты поиска

Содержание BR1 ENT

Отзывы:

Похожие инструкции для BR1 ENT

Бренды по названию

Популярные бренды