Pepwave BR1 ENT, Руководство пользователя

Страница: 116 / 206

NAT Mapping Settings
LAN
Client(s)
NAT mapping rules can be defined for a single LAN ​ IP Address ​ , an ​ IP Range ​ , or an ​ IP
Network ​ .
Address
This refers to the LAN host’s private IP address. The system maps this address to a
number of public IP addresses (specified below) in order to facilitate inbound and
outbound traffic. This option is only available when
​ IP Address ​ is selected.
Range
The IP range is a contiguous group of private IP addresses used by the LAN host. The
system maps these addresses to a number of public IP addresses (specified below) to
facilitate outbound traffic. This option is only available when
​
IP Range
​
is selected.
Network
The IP network refers to all private IP addresses and ranges managed by the LAN host.
The system maps these addresses to a number of public IP addresses (specified below)
to facilitate outbound traffic. This option is only available when
​ IP Network ​ is selected.
Inbound
Mappings
This setting specifies the WAN connections and corresponding WAN-specific Internet IP
addresses on which the system should bind. Any access to the specified WAN
connection(s) and IP address(es) will be forwarded to the LAN host. This option is only
available when
​ IP Address ​ is selected in the ​ LAN Client(s) ​ field.
Note that inbound mapping is not needed for WAN connections in drop-in mode or IP
forwarding mode. Also note that each WAN IP address can be associated to one NAT
mapping only.
http://www.peplink.com 116 Copyright @ 2017 Pepwave