manualshive.com logo in svg

Pepwave BR1 ENT, Руководство пользователя, Страница: 168 / 206

Поделиться
Скачать
Pepwave BR1 ENT Скачать руководство пользователя страница 168

 

inactive firmware, you can simply reboot your device with the inactive firmware and then 
perform the firmware upgrade.

 

 

Important Note

 

The firmware upgrade process may not necessarily preserve the previous configuration, and the behavior varies on 
a case-by-case basis. Consult the release notes for the particular firmware version before installing. Do not 
disconnect the power during firmware upgrade process. Do not attempt to upload a non-firmware file or a firmware 
file that is not supported by Peplink. Upgrading the Pepwave router with an invalid firmware file will damage the unit 
and may void the warranty.

 

 

Important Note

 

If the firmware is rolled back from 5.x to 4.x, the configurations will be lost.

 

 

25.3 Time

 

Time Settings

​

 enables the system clock of the Pepwave router to be synchronized with a 

specified time server. Time settings are located at 

​

System>Time

​

.

 

 

Time Settings

 

Time Zone

 

This specifies the time zone (along with the corresponding Daylight Savings Time scheme). 
The 

​

Time Zone

​

 value affects the time stamps in the Pepwave router’s event log and e-mail 

notifications. Check 

​

Show all

​

 to show all time zone options.

 

Time Server

 

This setting specifies the NTP network time server to be utilized by the Pepwave router.

 

 

25.4 Schedule

 

Enable and disable different functions (such as WAN connections, outbound policy, and

 

 

 

 

 

 

 

 

 

 

 

 

firewalls at different times, based on a user-scheduled configuration profile. The settings for

   

 

 

 

   

 

 

 

 

 

 

 

http://www.peplink.com 

168 

  Copyright @ 2017 Pepwave 

 

Содержание BR1 ENT















































































































































































































Отзывы:

Нет отзывов