Troubleshooting
2
0
2
0
-0
6
57
7
Troubleshooting
7.1
Diagnostics Indicator in the Integrated Web Server
The module shows the error diagnostics on the connection page of the integrated web server.
For information on how to call up the connection page, see chapter 6.
Figure 7.1
Diagnostic data is displayed in the "Port Diagnosis" area of the connection page, according to
the connection.
7.2
Alarm Signals and Error Messages from Modules via PROFINET
If the modules detect a fault state, they trigger an alarm signal. The modules support diagnostic
alarms. Diagnostic alarms are triggered by periphery faults, such as overloads, short circuits,
and low voltage.
An alarm is triggered both by incoming events (e.g., sensor short circuits) and outgoing events.
The alarms are evaluated dependent on the PROFINET IO controller used.
Note
Alarm signals and error messages are only transmitted via PROFINET if the parameter for
diagnosis is activated in the controller when the modules are configured.
