peplink Pepwave MAX Series, Руководство пользователя

Страница: 139 / 218

https://www.peplink.com Copyright @ 2021 Pepwave
AP Settings
SSID
These buttons specify which wireless networks will use this AP profile. You can
also select the frequencies at which each network will transmit. Please note that
the Peplink Balance does not detect whether the AP is capable of transmitting at
both frequencies. Instructions to transmit at unsupported frequencies will be
ignored by the AP.
Operating Country
This drop-down menu specifies the national / regional regulations which the AP
should follow.
● If a North American region is selected, RF channels 1 to 11 will be
available and the maximum transmission power will be 26 dBm (400
mW).
● If European region is selected, RF channels 1 to 13 will be available. The
maximum transmission power will be 20 dBm (100 mW).
NOTE: Users are required to choose an option suitable to local laws and
regulations.
Per FCC regulation, the country selection is not available on all models marketed
in the US. All US models are fixed to US channels only.
Preferred
Frequency
These buttons determine the frequency at which access points will attempt to
broadcast. This feature will only work for APs that can transmit at both 5.4GHz
and 5GHz frequencies.
Protocol
This section displays the 2.4 GHz protocols your APs are using.
Channel Width
There are three options: 20 MHz, 20/40 MHz, and 40 MHz. With this feature
enabled, the Wi-Fi system can use two channels at once. Using two channels
improves the performance of the Wi-Fi connection.
Channel
This drop-down menu selects the 802.11 channel to be utilized. Available options
are from 1 to 11 and from 1 to 13 for the North America region and Europe region,
respectively. (Channel 14 is only available when the country is selected as Japan
with protocol 802.11b.) If Auto is set, the system will perform channel scanning
based on the scheduled time set and choose the most suitable channel
automatically.
Auto Channel
Update
Indicate the time of day at which update automatic channel selection.
Output Power
A
This drop-down menu determines the power at which the AP under this profile
will broadcast. When fixed settings are selected, the AP will broadcast at the
specified power level, regardless of context. When Dynamic settings are
selected, the AP will adjust its power level based on its surrounding APs in order
to maximize performance.
The
Dynamic: Auto
setting will set the AP to do this automatically. Otherwise,
the Dynamic: Manual setting will set the AP to dynamically adjust only if
instructed to do so. If you have set Dynamic:Manual , you can go to
AP>Toolbox>Auto Power Adj. to give your AP further instructions.
If you click the Boost checkbox, the AP under this profile will transmit using