peplink Pepwave MAX Series, Руководство пользователя

Страница: 164 / 218

https://www.peplink.com Copyright @ 2021 Pepwave
InControl is a cloud-based service which allows you to manage all of your Peplink and Pepwave
devices with one unified system. With it, you can generate reports, gather statistics, and
configure your devices automatically. All of this is now possible with InControl.
When this check box is checked, the device's status information will be sent to the Peplink
InControl system. This device's usage data and configuration will be sent to the system if you
enable the features in the system.
Alternately, you could also privately host InControl. Simply check the box beside the “Privately
Host InControl” open, and enter the IP Address of your InControl Host.
You can sign up for an InControl account at https://incontrol2.peplink.com/. You can register
your devices under the account, monitor their status, see their usage reports, and receive offline
notifications.
28.9
Configuration
Backing up Pepwave router settings immediately after successful completion of initial setup is
strongly recommended. The functionality to download and upload Pepwave router settings is
found at System>Configuration . Note that available options vary by model.
Configuration
Restore
Configuration to
Factory Settings
The Restore Factory Settings button is to reset the configuration to factory default
settings. After clicking the button, you will need to click the Apply Changes button
on the top right corner to make the settings effective.
Download Active
Configurations
Click Download to backup the current active settings.
Upload
Configurations
To restore or change settings based on a configuration file, click Choose File to
locate the configuration file on the local computer, and then click Upload . The new