peplink Pepwave MAX Series, Руководство пользователя

Страница: 77 / 218

https://www.peplink.com Copyright @ 2021 Pepwave
PepVPN Profile Settings
Name
This field is for specifying a name to represent this profile. The name can be any
combination of alphanumeric characters (0-9, A-Z, a-z), underscores (_), dashes
(-), and/or non-leading/trailing spaces ( ).
Active
When this box is checked, this VPN connection profile will be enabled. Otherwise,
it will be disabled.
Encryption
By default, VPN traffic is encrypted with
256-bit AES
. If
Off
is selected on both sides
of a VPN connection, no encryption will be applied.
Authentication
Select from By Remote ID Only , Preshared Key , or X.509 to specify the method
the Peplink Balance will use to authenticate peers. When selecting
By Remote ID
Only , be sure to enter a unique peer ID number in the Remote ID field.
Remote ID /
Pre-shared Key
This optional field becomes available when Remote ID / Pre-shared Key is
selected as the Peplink Balance’s VPN Authentication method, as explained
above. Pre-shared Key defines the pre-shared key used for this particular VPN
connection. The VPN connection's session key will be further protected by the pre-
shared key. The connection will be up only if the pre-shared keys on each side
match. When the peer is running firmware 5.0+, this setting will be ignored.
Enter Remote IDs either by typing out each Remote ID and Pre-shared Key, or by
pasting a CSV. If you wish to paste a CSV, click the icon next to the “Remote ID
/ Preshared Key” setting.
Remote
These optional fields become available when X.509 is selected as the Peplink