peplink Pepwave MAX Series, Руководство пользователя

Страница: 32 / 218

https://www.peplink.com Copyright @ 2021 Pepwave
DHCP Relay Settings
Enable
Check this box to turn on DHCP relay. Click the icon to disable DHCP relay.
DHCP Server IP
Address
Enter the IP addresses of one or two DHCP servers in the provided fields. The
DHCP servers entered here will receive relayed DHCP requests from the LAN. For
active-passive DHCP server configurations, enter active and passive DHCP server
relay IP addresses in
DHCP Server 1
and
DHCP Server 2.
DHCP Option 82
DHCP Option 82 includes device information as relay agent for the attached client
when forwarding DHCP requests from client to server. This option also embeds the
device’s MAC address and network name in circuit and remote IDs. Check this box
to enable DHCP Option 82.
Once DHCP is set up, configure
LAN Physical Settings
,
Static Route Settings
,
WINS Server
Settings
, and
DNS Proxy Settings
as noted above.
8.2
Port Settings
To configure port settings, navigate to Network > Port Settings
On this screen, you can enable specific ports, as well as determine the speed of the LAN ports,
whether each port is a trunk or access port, can well as which VLAN each link belongs to, if any.
8.3
Captive Portal
The captive portal serves as a gateway that clients have to pass if they wish to access the
internet using your router. To configure, navigate to Network>LAN>Captive Portal .