peplink Pepwave MAX Series Скачать руководство пользователя страница 28

Страница: 28 / 218

https://www.peplink.com

DNS Proxy Settings

Enable

To enable the DNS proxy feature, check this box, and then set up the

feature at

Network>LAN>DNS Proxy Settings

. A DNS proxy server can

be enabled to serve DNS requests originating from

LAN/PPTP/SpeedFusion

peers. Requests are forwarded to the

DNS

servers/resolvers

defined for each WAN connection.

DNS Caching

This field is to enable DNS caching on the built-in DNS proxy server. When

the option is enabled, queried DNS replies will be cached until the records’

TTL has been reached. This feature can help improve DNS lookup time.

However, it cannot return the most up-to-date result for those frequently

updated DNS records. By default,

DNS Caching

is disabled.

Include Google Public

DNS Servers

When this option is

enabled

, the DNS proxy server will also forward DNS

requests to Google's Public DNS Servers, in addition to the DNS servers

defined in each WAN. This could increase the DNS service's availability.

This setting is disabled by default.

Local DNS Records

This table is for defining custom local DNS records. A static local DNS

record consists of a host name and IP address. When looking up the host

name from the LAN to LAN IP of the Pepwave router, the corresponding IP
address will be returned. Press

to create a new record. Press

to remove a record.

DNS Resolvers

Check the box to enable the WINS server. A list of WINS clients will be

displayed at

Network>LAN>DNS Proxy Settings>DNS Resolver

. This

field specifies which DNS resolvers will receive forwarded DNS requests. If

no WAN/VPN/LAN DNS resolver is selected, all of the WAN’s DNS

resolvers will be selected.

If a SpeedFusion

peer is selected, you may enter the VPN peer’s DNS

Содержание Pepwave MAX Series




































































































































































































Результаты поиска

Содержание Pepwave MAX Series

Отзывы:

Похожие инструкции для Pepwave MAX Series

Бренды по названию

Популярные бренды

peplink Pepwave MAX Series, Руководство пользователя

Результаты поиска

Содержание Pepwave MAX Series

Отзывы:

Похожие инструкции для Pepwave MAX Series

Бренды по названию

Популярные бренды