TRANSLATION OF ERROR CODES ---------------------------------------------------------------------------------------------------------------
ERROR
CODE DESCRIPTION
CHECKING AND SOLUTION
E1
Communication Abnormal: when the
power is on, the connection between lower
controller and the console is abnormal.
Possible Cause:
the communication between the lower control-
ler and console is blocked, check each joints between the control-
ler and console, ensure that each core is fully plugged in. Check
the the connection line, replace it if it’s damaged.
E2
No signal from motor.
Possible Cause
:
Check the motor cable to see whether it is connected well or not,
if not, connect the motor wire again.
Check the motor cable to see whether it is damaged or has a
burnt smell, if yes, replace the motor.
Check the speed sensor to see whether it is correctly installed or
damaged.
E5
Over current protection:
In working , the lower controller detects the
current to be over 6A for more than
3 seconds.
Possible Cause:
Overloading leads to excessive current, and the system stops out
of self-protection, or some part is stuck, causing the motor to
stop. Adjust the treadmill and restart it. Check if there is liquid or
burnt smell while the motor is running, if yes, replace the motor;
check if the controller has a burned smell, if yes, replace the con-
troller; check the power supply voltage, if it does not match the
specifications, change into correct voltage and test the machine
again.
E6
Explosion-proof impact protection:
the abnormal voltage or motor cause the
faulty of circuit that drive the motor.
Possible Cause:
Check if the power supply voltage is 50% lower than normal volt-
age, use the correct voltage and test the machine again, check if
the controller has a burnt smell and replace the controller; Check
if the motor cable is connected and connect the motor wire again
.
E07
No safety key.
Put the safety key on the right place.
SHOCK REDUCING SYSTEM
• These springs are reducing system for shock reducing
when user have a walk or running on the treadmill.
FOOT
• This is treadmill foot to fix the machine.
When the ground is uneven, You can adjust the knob for
Keep the treadmill level, Please note.
Note:
above functions and any button changed depend on real operation. the manual modifications will not to notice,
it all depends on the actual product.
