4. Use a screwdriver to lock the decorative cover around the base on both sides with screw M5*14.
5. Put two foams and decorative covers on the frame pipe.
NOTE: please confirm that all screws are locked uniformly according to the requirements after installation,
and check no part is left out before plugging electricity.
6. Put safety key on the position showing bellow, and the installation is done.
• Please turn on the power switch.
• Please put on the Safety key as shown above.
• Please press the start button, Then treadmill is running
• When you take off the Safety key, the treadmill will stop.
• Or You can press the STOP button, the treadmill will stop also.
SAFETY KEY