ROUTINE MAINTENANCE AND INSTRUCTIONS ------------------------------------------------------------------------------
Warning: Before cleaning or maintaining products, please be sure the power plug of the treadmill is pulled out.
• Cleaning: Comprehensive cleaning will extend the using life of the electric treadmill.
• Remove dust periodically in order to keep the parts clean. Be sure to clean running belt with both sides of the exposed por-
tion, which will reduce the accumulation of impurities. Make sure to wear clean athletic shoes to avoid carrying the dirty
matters into running board and belt. Treadmill belts shall be cleaned by a damp cloth with soap. And please pay attention
to avoid to wet the electrical components and running belt.
Warning: Make sure power plug disconnect before moving motor cover away, clean the motor at least once a year.
Running belt specialized lubricant
• This electric treadmill’s running board and running belt has been lubricated in factory. Friction between the running belt
and running board has a great influence to the using life and the performance of the electric treadmill, therefore regular
applying of lubricant is needed. We advise you to check the board regularly. If the board’s surface is damaged, please con-
tact our customer service center.
• We advise using lubricant between running belt and running board with following schedule:
• Lightweight user (use less than 3 hours a week) once per month;
• Heavyweight use (use more than 7 hours a week) once every half month.
1. In order to better safeguard your electric treadmill and extend the life of the machine, it is recommended that after your
continued use of two hours, turn off the machine and let it rest for 10 minutes before using again.
2. If the treadmill belt is too loose, there will be skid phenomenons while running; if it’s too tight, it may reduces motor
performance and harden the abrasion of roller and the running belt. You can lift two sides of the running belt for 50-75mm
when the tightness is appropriate.
Running with adjusted alignment and tightness
• In order to better use the treadmill and make the treadmill functions work better, it is necessary for you to adjust the
running belt into the best condition.
Running Belt alignment
• Put electric treadmill flat on the ground.
• Make the electric treadmill run at a speed of about 6-8km/hour .
• If the running belt is closer to the right, rotate the right adjusting bolt with 1/2 turn clockwise, then rotate the left adjust-
ing bolt with 1/2 turn counter-clockwise. (Picture B)
• If the running belt is closer to the left, rotate the left adjusting bolt with 1/2 turn clockwise, then rotate the right adjusting
bolt with 1/2 turn counter-clockwise. (Picture A)
Picture
A Picture
B
