Multi-wedge Belt Tension Adjusting
• When you use the treadmill for a long time, the multi-wedge belt becomes loose because of the abrasion, then you have to
do some appropriate adjustment to facilitate the safe use.
• Judgment: the feeling of running with the occasional pause phenomenon, which indicating that the treadmill belt or
multi-wedge belt are a little loose and further affirmation need to be made.
• Method of judging which part is loose: Remove the four screws on protective cover, make the treadmill run at a speed of 1
km/h, and then stand on the running belt, grip the armrests, and tread the treadmill belt slightly.( we advise treading the
treadmill belts with the user’s own weight)
A.
The instantaneous step can not stop the belt, the tightness is appropriate.
B.
If your instantaneous step stops the running belt, but the multi-wedge belt and former roller is still runing, it indicates
that the running belt is loose and appropriate adjustments must be made to facilitate the safe use
C.
If you observe that the instantaneous step makes the treadmill belt and multi-wedge belt stop, but the motor is still
running, it indicates that the multi-wedge belt is loose and appropriate adjustments must be made to facilitate the the
safe use
Step 2:
Use a wrench to adjust the screws on the motor base according the the condition. Meanwhile, gently flip the
multi-wedge belt between the motor shaft and the front roller, if it is too loose, you can flip the multi-wedge belt
by 100%; if it is too tight, the degree for you to flip the belt is very limited. It is appropriate to flip the multi-wedge
belt by 80% after adjustment. Please adjust the tightness of the multi-wedge belt into the state that it could be
flipped by 80%.
Step 3:
Finally lock the motor base,and install the front cover.
Applying silicone oil
Step 1:
Open up the treadmill belt
Step 2:
Open the silicone oil bottle, squeeze the silicone oil to the side of running board , as shown in the
following picture:
Running belt
Running board
