79
Symptom
Corrective Action
Pad Mode
writing is not
accurate and/or consistent
1.
Ensure that you are writing on the latest version of the
penveu®
Pad
paper
.
(Check
for the latest version of the
penveu®
Pad
paper
).
2.
Ensure that the
penveu®
Pad
paper
is printed in landscape orientation, and in
its actual size with no scaling or resizing.
3.
Ensure that the
penveu®
Pad
paper
is placed or held in a relatively horizontal
orientation (45 degrees or less from the horizontal) such as a table or podium.
6.
Rotate the
penveu®
Pad
paper
so that the “TOP” arrows on the paper are at
the top of the paper.
4.
Rotate the
penveu®
Pad
paper
to make the vertical lines on the paper parallel
to the pen.
5.
Do not sharply tilt the
pen
to its side relative to the
penveu®
Pad
paper
.
(Refer to
Section 1.3.3 penveu® Pad Mode
5.7
Hardware Reset
Should you experience difficulty with the
penveu system
as described in the Troubleshooting
section, follow these steps to reset your
penveu system
.
1.
Disconnect all cables (including the power cable) from the
veu
.
2.
Reconnect all the cables removed in Step 1 to the
veu
.
3.
Use a small tool to press the RESET button* on the
pen
.
4.
Place
pen
in
veu
.
5.
Verify normal operation is restored.
6.
If
penveu
does not function normally after completing the above steps, refer to
*The Hardware RESET button is between charging contacts on the
pen
5.8
Return Merchandise Authorization
Return Merchandise Authorization must be approved prior to returning the
penveu system
.
Follow this process before you return the
penveu system
for repair or replacement.
Refer to
and click on Support at the top of the page. Select Warranty & Repair
and follow the online process to obtain RMA (Return Merchandise Authorization) and
instructions.
This chapter provides a description of the
penveu system
and instructions for its use. For best
results, review the components and controls before use. The
penveu system
contains sensitive
components. Do not drop, disassemble, microwave, burn, or paint the
penveu system
. Do not
use the
penveu system
if it has been damaged. For example, if the
penveu system
is
damaged by water, cracked or punctured, do not use it. Damage to the
penveu c
aused by
misuse, abuse, or contact with liquid is not covered under the warranty.
To avoid injury, read all operating instructions and safety information
in this guide before using the
penveu system
.
Содержание penveu32
