27830 -2/40-
A185
1mm
OUTLINE OF DISASSEMBLY AND ASSEMBLY
Outline: Follow the procedures of disassembly and assembly concerning the notice in the
section described.
Chart for disassembly and assembly
DISASSEMBLY AND ASSEMBLY PROCEDURES
1. EXTERNAL PARTS
[CAUTION] Use an anti-static working mat and the wrist strap.
[NOTE] Assemble the external parts in reverse order of disassembly procedures in accordance
with “Note of assembly”.
[Preparation] Remove the Eye cap F
M
(for *ist) and Hot shoe cover F
K
(for MZ-7, MZ-30).
[Disassembly Procedures]
1-1. Bottom Cover (A401)
1
）
7 screws
[CAUTION] Do not attempt to remove the bottom cover
at this stage to prevent damage for the hook of bottom cover.
2
）
A185 (Refer to Fig.2)
Fig.1
3
）
Open the battery cover, and lift the front cover up 1mm forward as shown in Fig.2.
4
）
Remove A401 and 0-A412 with care to prevent damage to hook portion of A401 while lifting
up the front cover.
[CAUTION]
-1. Do not touch at the flash P.C. board.
-2. Do not apply the pressure on the AF module.
5
）
Temporarily install A133 and W13 with TY-CNL-F1.4x4.0.
Fig.3 Fig.2
A401
A187
A187
A191
A189
A185
0-A412
1. External parts
6. Top cover
7. Back cover
3. Main body and Front housing block
5. Main body
4. Front housing
2. Main P.C. board
Final adjustments
and confirmation
8. Assembly of Main P.C. board
START
FINISH
