27830 -25/40-
7. BACK COVER
[Disassembly Procedures]
7-1. 0-A202
Remove 0-A202 while lifting up it from
the film information window side.
7-2. A239
1) A187 (x4), A239
2) A215
･
A216, A217
7-3. A223
Fig.136
2 screws
7-4. A238 (0-T200)
1) 4 screws, A238
2) A201
[Assembly Procedures]
7-1. 0-T200
1) Stick DT (x5) on 0-T200 as shown in Fig.137.
2) Fold up 6 places as shown in Fig.137.
3) O209
4) Install 0-T200 to A238.
Fig.137
5) O208
・
O210
6) A225, A226 (x2)
7) Clean up dust from the lands part of 0-O200,
and then connect it with 0-T200.
7-2. A201
1) Apply L115 (3 places) and G134.
2) A251 and related parts
3
）
A255 and related parts
4
）
A224 (x4)
5
）
Other related parts
7-3. A238 (0-T200)
1) Peel of the scratch protection seal from the LCD.
2) Apply G151 to the switch lands of 0-T200.
3) Install A238 to A201 by 4 screws.
A183 (3mm), A185 (3.5mm x2), A187 (4mm)
7-4. A223
1) Install A223 on a parallel with the main body.
2) TY-CNL-D1.7x2.5Ni (x2)
Fig.138
7-5. A239
1) Apply L115 to the place indicated in Fig.139.
2) A215
･
A216, A217
3) A239, A187 (x4)
7-6. 0-A202
[CAUTION] When installing 0-A202, use caution to
prevent a scratch to A239.
Fig.139
DT(5x5)
DT(10x10)
DT(6x20)
（∧）
（∨）
O209
O208
O210
A226
A225
A238
0-T200
L115
A238 (0-T200)
A201
G151
A224
A224
G134
A239
A223
A217
A216
L115
A215
