27830 -24/40-
6) Arrange 4 lead wires of 0-Q100, using care that they do not overlap each other.
(Brown, Black, Green, Blue from left side in Fig.131.)
7) Q4, A349 (Apply screw-lock agent)
8) 0-Q5, LW10
Fig.131
9) Set the flash unit pop-up condition, and insert 4 lead wires to under the Q4 approx.1mm to
permit enough slack in wires, and then fix them by DT (5x10).
10) TY-CNL-D1.7x3.5 (x2, Q4)
11) Apply Super-X (black) as shown in
Fig.132 to fasten the lead wires.
12) A328, A329 (SW), TY-CNL-D1.7x2.5
13) Solder 2 black lead wires, and arrange them.
6-14. 0-A364
1) Install A369 (Arm retainer spring) to 0-A364.
Fig.132
2) Apply G134 as shown in Fig.133. (4 places)
3) 0-A364, A370 (Retainer ring)
4) Hook A368 (Flash pop-up spring).
Fig.133
Fig.134
5) Stick on T83 (10x20) as shown in Fig.135.
Fig.135
DT(5x10)
Super-X (B)
A329
TY-CNL-D1.7x3.5
A328
G134
G134
0-A364
A369
A370
A368
T83
A349
Q4
0-Q5
LW10
