27830 -19/40-
TY-CNS1.7x4.0
TY-CNL-D1.7x5.5
TY-CNL-D1.7x5.5
TY-CNL-D
1.7x4.0
A14
A10
G126
G151
a= 1〜2mm
a
a
T607
5-6. C1 (assy.)
1
）
DT (4x10)
2
）
C11 (Apply G134 to 2 places inside of C11.)
[CONF.] Make sure that C11 should be dropped
by self-weight. (NG: replace C12)
Fig.93
3
）
C1, TY-CNS1.7x4.0, TY-CNL-D1.7x5.5
[NOTE] Fix the lower side of motor to A2 by DT (4x10).
4
）
[CONF.] Make sure that C11 rotates smoothly,
and having vertical play.
5
）
A14, A10, TY-CNL-D1.7x5.5 (rear side), …1.7x4.0
5-7. Winding and Pop-up mech.
Fig.94
1
）
Apply G126 to shafts (4 places) of C1.
2
）
Apply G151 slightly to T29 code plate and shaft.
3
）
0-C17 (Apply G126 to all around of cam.), C4, C3
4
）
0-C6 (Apply G126 to outer around of shafts
Fig.95
part of 0-C6.), C5
5
）
C13, C21, C14, C15
6
）
Install 0-C20 with hooking it to the place
indicated by arrow in Fig.97.
TY-CNL-D1.7x8.0, …1.7x4.0
Fig.96
Fig.97
5-8. 0-T601 (T605)
1
）
Insert T607 into the square hole
as shown in Fig.98.
2
）
Fold down 0-T601.
Fig.98
3
）
Install 0-T601 while lifting up C1 slightly.
[CAUTION] Before installing 0-T601, clean up dust on the LED.
Fig.99
TY-CNL-D
1.7x8.0
TY-CNL-D1.7x4.0
0-C20
G126
G126
0-C17
C4
C3
C5
0-C6
C14
C21
C13
C15
[Note of Disassembly]
Peel off the lower side of motor from DT.
