27830 -26/40-
8. ASSEMBLY OF NAIN P.C. BOARD
1) Stick the following tapes.
DT
･･･
2 places, 8 places (the reverse)
PT
･･･
2 places, BT
･･･
2 places
2) Solder 3 lead wires (Red, Orange, Green) as shown in Fig.140.
3) Install I400 to 0-T100 by soldering 6 lands.
4) Cut off 2 places. (Cut off: 0-T100, I400)
5) Fold up 20 places.
[CAUTION]
1. Do not apply a stress to parts.
2. Do not fold up as acute angle or wrong directions.
6) Fold up 0-T100 while aligning the positioning holes indicated by allow in Fig.140, and then
stick the flexible boards together by DT.
[CAUTION] Do not press the folded parts to prevent damage of 0-T100.
7) Stick on together both flexible board portions of 0-T100 by T94 (10x13).
Fig.140
（∧）
（∨）
Cut off
I400
PT(6x8.5)
DT(7x10)
DT(3x7)
DT(10x10)
DT(5x10)
DT(10x20)
DT(11x30)
DT(7x10)
DT(3x7)
T94 (10x13)
T97 (PT(6x6)
BT(6x10)
BT(10x30)
10 Red (35mm)
25 Orange
(45mm)
28 Green
(30mm)
*Solder 6 lands
*Cut off
Positioning holes
