TEL:
1.012345678987653
2.
3.
4.
5.
4.Forward the edited SMS to the panel SIM card.
5.A confirmation SMS will be sent from the panel:
6. Send an SMS with the text "0001" to the SIM card of the panel.
7.The panel confirms with SMS:
Pressing of keys on the panel [4-10] is confirmed by a beep sound.
The arm status of the system is indicated by the illumination of the arm
key [4], similarly the part arm status by the part arm key [9] and the
diarmed status by the disarm key [10].
Press the record key [8]. You now have 10 seconds recoding time
indicated by the illuminated key. The play key [3] now flashes to
indicate an unheard memo.
To listen to the memo, press the play key, which then ceases to flash. You
can repeatably listen to the last memo by pressing the play button.
Press the telephone key [5]. The panel calls the preset number and you
telephone through the inbuilt microphone [11] and speaker [20].
During the call the telephone key is illuminated.
To quit the call, repress the telephone key.
The preset number is set using SMS 8 (see chapter 14)
Key in the required number using the numeric keys [6] and then press
the telephone key [5]. The panel calls the number and then you can
telephone through the inbuilt microphone [11] and speaker [20].
During the call the telephone key is illuminated.
To quit the call, repress the telephone key
Press the arm key [4] to arm the system. If a delay is set then you can
exit the dwelling during this period. During this period the panel beeps
each second, during the last 15 seconds it beeps twice per second.
To part arm the system press the part arm key [9].
To disarm the system key in the user code (factory default: 1 2 3 4)
followed by the disarm key [10].
The system can also be disarmed by holding an enrolled RFID tag in
front of the RFID reader [3].
Alarm-Telefonnr.
erfolgreich gespeichert.
Set English successfully.
Note:
#
#
!
!
!
!
!
!
!
!
!
!
12.1 Recording and playing of voice memo on the panel
12.2 Automatic dialing of preset number from the panel
12.3 Telephone call through the panel
12.4 Arm and disarm on the panel keypad
12.5 Disarm using RFID tag
12.6 Arm and disarm using the remote control
12.7 Panic alarm from the remote control
12.8 Arm and disarm by telephone call
12.9 Operation via SMS
!
!
!
!
!
!
!
!
!
!
!
To arm
To part arm
To disarm
]
press the full arm button [38]. The panel confirms with one beep.
If a delay has been set the siren will beep every second and you have
time to leave the dwelling during the delay period without triggering
alarm. During the last 15 seconds of the delay period the panel beeps
twice per second.
If you wish to arm without confirmation beeps then press the part arm
button [36] before pressing the full arm button.
press the part arm button [36]. The panel confirms with one
beep. If a delay has been set the siren will beep every second and you
have time to leave the dwelling during the delay period without
triggering alarm. During the last 15 seconds of the delay period the
panel beeps twice per second.
If you wish to part arm without confirmation beeps then press the part
arm button two times.
press the disarm button [34 . The panel confirms with two
beeps.
If you wish to disarm without confirmation beeps then press the part arm
button [36] before pressing the disarm button.
Press the panic button [35]. The siren will sound alarm for approx. 3
minutes.
You can silence the alarm by pressing the disarm button [34].
To arm the system, call the number of the panel SIM card from one of the
stored telephone numbers (stored with SMS 5). Hang up after hearing
the first ringing tone. As confirmation of arming the panel calls the
number back an hang up immediately.
To disarm the system, call the number of the panel SIM card from one of
the stored telephone numbers (stored with SMS 5). Hang up after only
after the panel hangs up.
Send an SMS from one of the stored telephone numbers (stored with
SMS 5) to the number of the panel SIM card. The SMS commands can
also be sent using the Application.
0
disarm
sends confirmation SMS
1
full arm
sends confirmation SMS
2
part arm
sends confirmation SMS
3
listen in
Panel calls back; Accept the call to listen
+ speak
and to speak through the panel
33
listen in
Panel calls back, Accept the call to listen in
4
record
Panel calls back. Accept the call after the
voice memo beep record for up to 10 sec.
SMS-text command
reaction of the panel
41
