19. Maint cleaning
20. Optional accessories
21. Enrolling further wireless components
and RFID tags
22. Enrolling a wireless indoor siren 3000IS
#
#
#
#
#
#
#
#
#
#
#
#
#
!
!
#
#
#
#
!
!
!
!
Regularly check the technical safety and function
Before you clean the device, pull the mains adapter out of the mains
socket and remove the batteries.
Use a soft, dry or slightly moist cloth or a dry brush for cleaning the
surfaces.
3000M, Door/window contact, Art.Nr.33531
3000R, Remote control, Art.Nr. 33532
3000P, PIR-detector, Art.Nr. 33530
3000 Set F3, wireless alarm system, Art.Nr. 33522
3000T, RFID tags (pack of 2), Art.Nr. 33535
MK01, magnetic contacts (pack of 3), Art.Nr. 33103
AS05, indoor siren, Art.Nr. 33133
BL02, strobe, Art.Nr.33134
RA300i/R, smoke alarm with relay output, Art.Nr. 10306
GA90-230, Gasalarm 230 V AC, Art.Nr. 22152
Enter the valid user code into the keypad of the panel (factory default
1 2 3 4)
Press the record key [8]. The key illuminates for 15 seconds. Within this
period enroll one of the following components as follows:
Remote control: press the disarm button [34] once
PIR-detector: press the test button [45] twice
door/window contact: trigger by separating magnet from the sensor
RFID tag: hold the tag in front of the RFID reader [3]
The enrollment is confirmed by one beep. A double beep means the
component is already enrolled. The first enrolled detector will be stored as
detector 1, the second as detector 2 etc. The detectors and the RFID tags in
the set are already enrolled.
It is possible to use the siren from the 3000 Set F3 as a wirless siren for the
3000Z panel. The wireless range between these components is max 40m (in
free space).
Delete all componenets from the 3000IS (see manual Set F3)
Press the connection button of the 3000IS, its LED will illuminate
Press the arm key [4] on the panel keypad. The enrollment will be
confirmed by one beep of the 3000IS.
Test the function by arming the panel. Both the panel and the siren
should confirm with one beep.
In alarm the 3000IS sounds. Its alarm period is factory set to 3 minutes and
this cannot be changed, irrespective of the alarm period set in the panel.
23. Deleting components and reset
24. Disposal
25. Declaration of conformity
26. Warranty
Delete all wireless components
Reset
!
!
Press the tamper button [16] 3 times within 3 seconds. The deleting will
be confirmed by 2 beeps.
Alternatively send SMS command "21"
Press the tamper button [16] 5 times within 3 seconds. The reset will be
confirmed by 2 beeps.
Alternatively send SMS command "0000"
Packaging material, used batteries or electrical products must not be
disposed of as household waste. Use your recycling system. Details
are available from your local authority.
INDEXA GmbH, Paul-Böhringer-Str. 3, D - 74229 Oedheim, hereby declares
that the 3000 Set F4 is in compliance with the essential requirements and
other relevant provisions of Directive 1995/5/EC. The original of the
conformity assessment can be found on the web site www.pentatech.de.
In addition to the statutory guarantee from the vendor, the manufacturer
warrants this product for 2 years from date of purchase (proof from receipt)
according to following conditions.This warranty does not affect your legal
rights. The warranty covers use of the product in normal conditions in private
households. It only covers manufacturing defects and is limited to the
replacement or repair of the faulty components. It does not include wear and
tear, or batteries. The warranty applies only when the product is used
according to the operating instructions. It does not cover damage arising
from misuse, improper handling, application of force, dust, dirt, water or
other environmental factors, or from incorrect voltage from batteries or power
supply. The warranty is void when the product has been repaired or tampered
by unauthorised persons and when it has been used with components which
are not specified by the manufacturer. In case of a warranty claim please
contact the vendor for details of how to proceed and how to return the product
if necessary. Only carriage paid authorised returns will be accepted. Repairs
can only be accepted when accompanied by a full description of the fault.
After the warranty period has expired repairs will be charged and are not
always possible. Warranty claims do not extend the warranty period and the
warranty for replacement parts expires with the warranty for the product.
Unless there is a statutory obligation, the manufacturer is not responsible for
further claims, including peronal or material damages, arising from the use
of the product or from nonfunction or misfunction of the product.
Indexa GmbH, Paul-Böhringer-Str. 3, 74229 Oedheim, Germany
www.pentatech.de, 2012/09/10
44
