9 |
S t r o n a
2.3. The pattern of the burner nameplate
Pic. 3. The pattern of the burner nameplate.
2.4. Technical data of burner
Main properties of Pellas X burners from HYBRID line:
Safety
Technology of overpressured burning and the built-in firewall with counterweight – no risk
of backfiring
Burner temperature sensor
Flexible pellet feeding pipe
– is melted when backfire occurs and fuel is not fed to the
burner
Reliability
Hybrid Drive System – lower electricity consumption costs and full synchronization of fuel
feeding into the air.
Automatic start after voltage failure – memory of recent settings
Furnace made of highest quality heat-resistant steel
Modern controlling system
Automatic operation: firing up, cleaning, flame control
Stepless (electronical) power regulation
Possibility of control over burning process by broadband lambda probe (optional)
Low emission of CO and CO
₂
Low consumption of electricity
Low heat inertia
High burning efficiency – up to 99 %
Very precise flame sensor
Fully compatible with automatics of oil and gas boiler and with bakery oven
Possibility of handling the chimney exhaust fan (the fan works periodically and does
not ventilate the boiler)
ATTENTION!
Change of pellets diameter during
using of burner (e.g. from 6mm to 8mm)
requires resetting the controller
by a qualified installer.
Содержание HYBRID 44
