Pellas X HYBRID 44, Руководство пользователя

Страница: 17 / 39

15 | S t r o n a
Table 7. Exemplary minimum dimensions of cylindrical furnace chamber.
TYPE OF BURNER
EXEMPLARY MINIMUM DIMENSIONS OF CYLINDRICAL
FURNACE CHAMBER
MINIMUM DIAMETER OF
CHAMBER [mm]
MINIMUM LENGTH OF
FURNACE CHAMBER [mm]
HYBRID Mini
270
400
HYBRID Mini 35 270 520
HYBRID 44 337 520
Table 8. Pressure in burning chamber.
TYPE OF BURNER PRESSURE IN BURNING CHAMBER [Pa]
HYBRID Mini 10
HYBRID Mini 35 15
HYBRID 44 20
3.3. Fuel hopper
Fuel hopper can be made of any non-flammable material, i.e. steel. It can have any
capacity and should be located in proper distance from burner (Pic.7). In lower part of
fuel hopper a spiral feeder in covering pipe is mounted. The slope of feeder should not
be bigger than 45° in relation to the floor. Fuel hopper must be covered with a lid which
would protect rotating screw of the feeder against damage by leftovers.
It is forbidden to manipulate on the bottom of the hopper during operation of feeder. It is a threat
to body injury – particularly to fingers. It must be remembered to refill the fuel hopper
with pellets type fuel before activating the burner. Never pour the fuel hopper with damp or
disintegrating fuel. It can cause difficulties in operation of burner – burner blockade.