Pellas X HYBRID 44, Руководство пользователя

Страница: 24 / 39

22 | P a g e
5. ADDITIONAL CONNECTIONS AND FIRST START-UP
1. Additional connections of the burner are described in the controller manual.
2. Determination of the supplied pellet capacity
a) Before starting the balancing procedure, make sure that the feeder is filled with
pellets.
b) Put an empty bag (e.g. pellet bag) under the feeder and start the feeder for 15
minutes. The pellet amount collected in the bag must be weighed.
c) The value being the result should be used in the FEEDER EFFICIENCY
PARAMETER since the value is required by the controller during the initial start-
up.
d) Enter the maximum operating power of the burner in the next step.
e) The controller will adjust the necessary pellet quantity automatically.
6. EXPLOITATION AND SAFETY REGULATIONS
6.1. Exploitation
Before starting up burner’s operation all connections and joints with feeder should be
checked. Mounting screws, which join burner with boiler should be checked, as well as thermal
seals between burner and boiler.
Burner is started up according to user’s manual after connection to electricity by power cord with
zeroed plug. In order to ensure correct operation of burner, depending on quality of fuel, the
inside of burner should be cleaned from fouling and slag.
Depending on a group of burners, there are different ways of conducting the maintenance of
furnace plate:
a) Maintenance of furnace plate in HYBRID Mini and HYBRID Mini35 burners
The Mini-series burners are equipped with the removable furnace.
ATTENTION!
Pellas X burners can only be handled
by adults. It is mandatory to be
acquainted with user’s manual before
servicing the burner.