PedigreeTechnologies.com | Support: (701)-499-0022
7
APMM Power Module Installation
for CalAmp LMU 3640
STEP ONE
For a previously installed LMU 3640, unplug the
diagnostic cable from the LMU.
STEP TWO
Plug the longer 16-pin plug from the APMM
harness into the 16 pin port on the LMU,
replacing
the diagnostic cable you just removed if working on
previously installed LMU.
STEP THREE
Plug the male 5 pin plug from the APMM harness
into the female 5 pin plug of the accessory harness.
OPTIONAL STEP
If this is a new installation of the LMU 3640, plug
the 20 pin plug of the accessory harness into the
20 pin port of LMU.
Remove Existing
Diagnostic Cable
APMM Harness
Male 5 pin from
APMM Harness
Female 5 pin
from Accessory
Harness
CameraView
Mitac