PedigreeTechnologies.com | Support: (701)-499-0022
12
STEP FIVE
Orient the camera to the windshield.
• Camera should be level to the horizon line.
• Point the lens forward with a slight downward
angle so the camera picks up the front hood at
the bottom of the frame.
• Rotate the camera lense on the mount to adjust
the position.
•
Peel the film from the mounting plate tape.
STEP SIX
Press the mount firmly to the windshield glass.
CameraView
Mitac
Mount Camera
continued
Installation Steps, Continued
Optional Check Camera Position
STEP ONE
On the tablet, open POV, but
stay logged out
.
STEP TWO
Tap the ellipsis menu in the upper right
corner of POV, and then select “Camera Setup”.
View from camera
STEP THREE
Connect:
use this button to search for powered
cameras in your immediate area. Choose
the matching IMEI number from any results
returned.
Standard Camera:
keep this field as “Standard Camera”’
Camera IMEI:
use this field to add the camera’s
IMEI to directly connect to this camera instead of
using the Connect to search.
(IMEI number is on the
lable of the camera beneath the mounting plate. Capture this
information before adding mounting plate.)
Once connected, use the horizon guide line to align your front camera and the Driver Face
circle to align your rear facing camera.
