2
Prerequisites
PedigreeTechnologies.com |
Support: (701)-499-0022
CameraView
Mitac
Required Information
•
Name of asset
(ex: Propane Truck #20)
•
IMEI of each device to be installed
(IMEI is on the label where the mounting plate is attached)
Standard Equipment
Required Tools
Rubbing Alcohol or Window Cleaner
(to clean window surface for best adhesion)
Level
(to level camera during mounting)
Drill with Phillps & Torx bits
Small Socket Set
Volt Meter
Tablet with POV
(Optional: to see live view of camera when setting mounting location)
Camera
Before You Begin
TIPS FOR PROPER CAMERA MOUNTING
• Ideal Location: Center (or as close to center as possible) of the windshield.
• Ideal Height: Highest point near rearview mirror - in the area swept by the wipers.
• Field of View: Should be clear of any occlusions (EZPass, rear view mirror, window tint, etc.)
• Angle: Camera should have a negative pitch angle (it should look “down” a few degrees.)
•
The field of view should not have too much “sky”.
• Split windows may have to adjust mounting location other than what is recommended in this
document. Consult with your implementation manager at Pedigree Technologies.
Power/Accessory
Harness
Tamper Cover
Mounting Plate
Optional Inline Fuses
Optional Circuit Taps
