PedigreeTechnologies.com | Support: (701)-499-0022
6
APMM Power Module Installation
for Cab-Mate One continued
STEP EIGHT
Connect the APMM harness to the AUX1 and LMU DIAG ports on the top of the APMM module.
STEP NINE
Mount the Cab-Mate One/APMM
assembly to the dash using the Panavise
ball mount
(not pictured).
STEP TEN
Connect the diagnostic cable to the port
on the APMM labled “VEHICLE DIAG” on
the bottom of the APMM module.
STEP ELEVEN
For a previosly installed camera, unplug the
10 pin plug from the port on the side of the
APMM power module.
Top view
Bottom view
STEP TWELVE
Connect the 10 pin plug from the
Power/Accessory Harnes cable into
the port on the side of the APMM
power module.
CameraView
Mitac
Unplug previous
cable
Connect 10 pin plug
from power cable