PCAN-Ethernet Gateway DR – User Manual
31
Frames per Packet:
This value specifies how many CAN frames are
transmitted per IP packet. The higher the value, the greater the
delay in the transmission of CAN messages. However, the demand
on performance is lower in this case. This selection is only available
for Send routes when using the UDP protocol.
Finally you can create a new route with the Add Route button or
save the changes after editing with the Save Settings button.
Note:
Transferring data between 2 PCAN-Gateways always
consists of a Send and a Receive route. Note that both should
use the same transmission protocol (TCP or UDP) and the same
port.
