PCAN-Ethernet Gateway DR – User Manual
34
Status:
The LED indicates the state of the CAN channel.
LED
Status
Meaning
Active
The channel is active and functional.
Inactive
The channel is inactive.
Error Active
Errors were detected on the BUS.
The CAN controller’s error count is lower than 128.
(BUSLIGHT)
Error Passive Errors were detected on the BUS.
The CAN controller’s error count is greater than 127.
(BUSHEAVY)
Bus Off
Errors were detected on the BUS.
The CAN controller’s error count is greater than 255.
The CAN controller has been switched off.
(BUSHEAVY)
Bit rate:
CAN channel transmission rate. This value should match
that of the connected CAN bus.
Listen-Only-Mode:
The state of the Listen-Only-Mode is represented
by an LED.
Status-LED
Meaning
Active. The CAN channel is not sending messages, nor is it
answering incoming messages (Acknowledge).
Inactive
Additional Information:
Furthermore status information can be
viewed, and user defined notes can be entered and saved. Click the
triangle icon on the right edge of the list item to view the
information. With the Reset button you can reset the CAN channel.
In Expert mode, (See chapter 5.5.2
Device > User Management
)
additional information is displayed.
