PCAN-Ethernet Gateway DR – User Manual
26
Note:
When changing the network topology, the list is not
updated automatically. If a device is removed from the network,
it will remain visible in the list of detected devices until the scan
is performed again and the list is updated.
5.3.1
Manage Routes
On the page
Routing > Manage Routes
the message forwarding
instances are listed with basic information and control options. For
each of these, the status, used transmission protocol, as well as the
source and destination are specified.
Status LEDs:
The LED indicates the status of a route.
Status-LEDs Meaning
The route is inactive.
The route is active and connected with the remote site.
Warning! The route is active but not connected with the remote
site.
PCAN-Gateway handshake is inactive.
Source / Destination:
The source and the destination depend on the
direction of the message forwarding.
In a Receive route the PCAN-Gateway receives data via the IP
interface and forwards it to a CAN channel. The IP address is
displayed in this case as "Local IP".
In a Send route the data of a CAN channel is forwarded over the IP
interface. By left-clicking the IP address of the receiver, its con-
figuration website can be opened.
