PCAN-Ethernet Gateway DR – User Manual
12
4.
Windows XP: Select from the list
This connection uses the
following items
>
Internet Protocol (TCP/IP)
Windows 8.1, 7, Vista: Select from the list
This connection
uses the following items
>
Internet Protocol Version 4
(TCP/IPv4)
.
Click on
Properties
and the dialog box
Internet Protocol
Properties
appears.
Make a note of the current settings in order to reset the
computer later on.
5.
Select
Use the following IP address
.
6.
Enter an
IP address
in the range from 192.168.1.1 to
192.168.1.254 (but not the PCAN-Gateway's own address
which is indicated on the left casing side).
7.
Click on
Subnet mask
. 255.255.255.0 is shown. Leave this
entry unchanged.
8.
Confirm the entries with
OK
.
3.1.2
Establishing the Connection
1.
Connect the RJ-45 connector of the PCAN-Gateway via a
LAN cable (included in the scope of supply) directly to the
computer.
2.
Connect the device to a suitable power supply (8 - 30 V).
3.
Wait until the PCAN-Gateway is ready (Status LED is
blinking green).
4.
Open a web browser on the computer.
5.
In the browser's address bar, enter the address of the PCAN-
Gateway (see the label on the left side of the device).
