PCAN-Ethernet Gateway DR – User Manual
28
Additional information:
In Expert mode (see chapter 5.5.2
Device> User Management
) each
route is provided with additional information about its connection
and data transfer status. This additional information can be viewed
by clicking on the triangle icon located on the right edge of the
route.
With the Reset button you can reset the values of the route to 0.
5.3.2
Add Route
On the
Routing > Add Route
page you can set up a new route.
Similarly, an existing route can be edited via the form displayed. For
this, the current settings are loaded into the form fields. Editing a
route is done via the page
Routing > Manage Routes
.
Regardless of their status up to 8 routes can be created. Then the
Add Route function is no longer available.
Route Direction:
When you create a route, you should start with the selection of
direction since the following input and output fields are determined
by this.
Receive IP > CAN:
In a Receive route the PCAN-Gateway receives
data via the IP interface and forwards it to a CAN channel. The IP
address shown in this case is "Local IP". The configuration of the
local IP interface is done on the
Network > LAN
page.
Send CAN > IP:
In a Send route the data of a CAN channel is
forwarded over the IP interface. If other PCAN-Gateways were
discovered during a broadcast scan, they can be selected for the
